Honigum Pro.
Producing true impressionist masterpieces.

Honigum Pro's unique characteristics of unparalleled flowability and outstanding stability means that, while the material flows perfectly, it's also non-slumping for mess-free handling, no drips during insertion and no inadvertent material run-off, either from the preparation or from the impression tray.

Honigum – stays where you need it – flowable when you want

From the makers of Luaxtemp and LuxaCore, Honigum Pro is the only VPS-material that goes where you want it, stays where you place it, and has the unique ability to thin under load. It makes its way into the tiniest of crevices and hard-to-reach areas that other impression materials can simply miss.

The combined exceptional tear strength + resistance to breakage ensures effective removal of the impression, preventing the need for retakes, including for prosthetic implant restorations.

“I love Honigum Pro for the accuracy and reliability it gives me. I rarely have to take a second impression with it. The margins are super clear. For me, this is everything I want in an impression material.” ­­­— Dr. Sarah Winter, DDS

"Honigum Pro’s handling characteristics and results meet all of my requirements for an exceptional impression material.” — Gary DeWood, DDS

Generous working time combined with a short intraoral setting time provide unbeatable results thanks to DMG's "Snap-Set" technology. The convenient working time minimizes stress, while the short setting time helps prevent distortions and inaccuracies because of micro-movements, reduced with faster cross linking. 

Patient Benefit: The shorter intraoral setting time means greater comfort to patients during treatment. 

Dentist Benefit: Dynamic viscosity results in superior impressions, with more working time for better control. 

Honigum Pro's unique characteristics of unparalleled flowability and outstanding stability means that Honigum Pro flows when it needs to flow. The premium quality of the impression material results in maximum precision with mess-free handling, no drips during insertion and no inadvertent material run-off, either from the preparation or from the impression tray.

The rheologically active matrix is uniquely beneficial
The "rheologically active matrix" comprising the internal structure of the VPS impression material makes it all possible.

If no "pressure" or "shear force" is applied, Honigum Pro remains stable. The material remains at the application site without any run-off, thanks to the special crystalline structure that no other material can offer.

Superior results in moist conditions 


Since impression materials must be able to handle moisture, flow behavior in the moist sulcus environment plays a crucial role in the accuracy of the impression - and thus in the quality of the restoration**.

Of the impression materials tested, Honigum Pro Heavy in combination with Honigum Pro Light, demonstrated the best flow behavior in moist conditions of the area of the subgingival preparation line in an artificial sulcus. This is due to the combination of improved hydrophilic properties and unique rheological behavior.

Honigum Pro also scored extremely high in terms of toughness and convenient processing.

Source 1: Internal DMG measurements, data on file. 2011, Source 2: Prof. B. Wostmann, Poliklinik fur Zahnarztliche Prothetik, Justus-Liebig University, Giessen, Germany. Internal report (2011), DMG, Germany

An impression that tears when it is removed from the mouth results in a wasted impression. It costs time, money, and is stressful for the patient. So, to prevent retakes, a good impression material should offer good tear strength and elongation at break above all else. The combination of these two vital factors is scientifically known as “toughness”.

Tear strength + elongation at break = toughness

Toughness ultimately ensures effective removal and thus plays a crucial role in the final restoration result. When measured*, Honigum Pro achieved the best toughness values of all the materials tested.

* Internal DMG measurements, 2010, data on file

In implant prosthetics, impressions play an important role. The position of the impression posts must be meticulously recorded and registered, and the careful transfer of the oral situation to the working model is critical in fabrication and in ensuring that the implant fits perfectly in the patient's mouth.

 

"Honigum Pro QuadFast materials are very useful for saving time in my impression procedure, plus viscosity is comfortable. In single crown preparation procedure, saving chair time is the most important key factor, so I am recommending it to my colleagues." — Dr. Yoshihiro Goto, DDS, MSD

 

Which technique should be used with which material, and which Honigum Pro to use

In the case of combined restorations comprised of implants and prepared teeth, the combination of Honigum Pro Heavy and Honigum Pro Light is recommended with the double-mixing technique. If only implants are used, Honigum Pro-Heavy is suitable as a mono phase impression material. 

 

Materials and Viscosities

Honigum Pro Type Color Cartridge Sizes
Honigum Pro Heavy Body Tray Blue 380ml cartridges or 50ml Automix cartridges
Honigum Pro Heavy Quad Fast Tray Teal 380ml cartridges or 50ml Automix cartridges
Honigum Pro Medium (Mono) Body Tray or Wash Green 380ml cartridges or 50ml Automix cartridges
Honigum Pro Mono Quad Fast Tray or Wash Dark green 380ml cartridges or 50ml Automix cartridges
Honigum Pro Light Wash High-contrast yellow 380ml cartridges or 50ml Automix cartridges 
Honigum Pro Light QuadFast Wash Bright yellow/orange 380ml cartridges or 50ml Automix cartridges 
Honigum Rigid X-tra Fast Tray Purple 50ml cartridges

Indications and Timing

The tables above can be expanded to show the working and setting times by material type, as well as the indications by material type. 

Honigum Pro Light Automix

2 50ml Cartridges

10 Automix & Intra-Oral Tips

Item # 989831

 

Honigum Pro Light QuadFast Automix

2 50ml Cartridges

10 Automix & Intra-Oral Tips

Item # 989832

 

Honigum Pro Heavy Automix

4 50ml Cartridges

8 Automix Tips

Item # 989766

 

Honigum Pro Heavy

1 380ml Cartridge

10 MixStar Mixing Tips

Item # 989537

 

Honigum Pro Heavy QuadFast Automix

4 50ml Cartridges

8 Automix Tips

Item # 989838

 

Honigum Pro Heavy QuadFast

1 380ml Cartridge

10 MixStar Tips

Item # 989638

 

Honigum Pro Mono

4 50ml Cartridges

8 Automix Tips & Intra−Oral Tips

Item # 989830

 

Honigum Pro Mono

1 380ml Cartridge

10 MixStar Tips

Item # 989568

 

Honigum Pro Putty

1 380ml Cartridge

10 MixStar Tips

Item # 989374

 

Honigum Pro Accessories

MixStar eMotion Machine

1 Mixing Machine Unit

Item # 999482

 

MixStar Blue Mixing Tips

1 Box of 50 Tips

Item # 993334

 

Honigum Pro Automix Tips (Heavy and Mono)

1 Bag of 50 Tips

Item # 999400

 

Honigum Pro Automix/Intra-Oral Mixing Tips (Light)

1 Bag of 35 Automix & Intra-Oral Tips

Item # 110424

 

Intra-Oral Tips (Mono)

1 Bag of 50 Tips

Item # 999490

 

Tray Adhesive

1 10ml Bottle

Item # 999394

 

Type 25 Applicator Gun (1:1)

Item # 110253

 

Type 50 Dispensing Gun (1:1)

Item # 999507